| Promulgator:admin | Add time：2019/1/8 | Viewed：706 | ||
| Notes for newly purchased toner cartridge: 1. Avoid using and storing in high humidity, high temperature and cold environment. If the toner cartridge is stored too long at high or cold temperatures, restore the cartridge to room temperature 2-3 hours before use. (the ideal working temperature: 15 to 25 ℃, relative humidity: 20-80%) 2, toner cartridge before use do not tear the seal, or toner once damp will agglomerate, affect the printing effect or cause light printing color. 3. Avoid exposure of toner cartridge to high light. Do not tear open the cartridge bag when not in use, especially do not open the toner drum light shield, if continuous exposure to strong light over 10 minutes, the drum may be scrapped. 4, when changing the toner cartridge, it is best to use a vacuum cleaner to place the toner cartridge, with a soft cloth clean paper on the accumulated confetti and toner, exposed electrical contact can be swabbed with alcohol to wipe, in order to maintain good electrical contact. 5, do not arbitrarily turn the OPC drum core by hand, the OPC drum core rotation must pay attention to the direction, if the direction of rotation is not right, will damage the parts caused by printing powder leakage or printing stains. Toner cartridge installation method includes: 1. Use the handle to fully open the front door 2. Hold the handle of the cartridge and pull it out of the machine 3. Take out the new cartridge and shake the cartridge 5 to 6 times to evenly distribute the toner inside the cartridge. Note: do not touch the green part below the cartridge. Please use the handle on the cartridge to avoid touching this area 4. Make sure the color of the cartridge matches the color of the slot, then hold the handle of the cartridge. Insert the toner cartridge until the cartridge cartridge is in position 5. Close the front door and make sure the door lock is tight Ii. Installation method of toner cartridge with seal: 1. The toner cartridge is sealed in the toner cartridge and shaken 6-8 times before use 2. Pull out the seal in the direction of arrow 3. When pulling out the seal, pull it out evenly and straight to avoid breaking 4. Load the toner cartridge into the printer as per the marked arrow | ||||
Welcome to the official website of zhongshan pinyin electronic technology co., LTD,Contact phone number:0760-86380010！
About Us|Products|Contact Us
One-stop supplier of printer consumables！
Professional toner manufacturer, high quality office printing!National advisory service hotline