| Promulgator:admin | Add time：2019/1/8 | Viewed：420 | ||
| Regeneration is not simply a matter of filling. There are a few caveats to be aware of before filling. The main points for attention of regenerated cartridge are: disassembling cartridge should be done lightly to prevent damage, missing parts and toner pollution; Can not use solvents and sharp cleaning drum and charging roller; Do not destroy or tear off the sealing sponge and the sealing felt, make it lose the sealing effect; Sensitive drum to be carefully preserved after removal, not in strong light; If the photosensitive drum scraper and magnetic roller scraper damage or aging, should be replaced in time; Pay attention to the lubrication of the drum, otherwise, the service life of the drum core will be greatly shortened after replacement; Keep the conductive contact of each component in good contact, no deformation; The parts of the regenerated cartridge should operate smoothly with low resistance. With these caveats in mind, let's start preparing the tools for regeneration. Generally, the following types of tools are used in operation: needle-nose pliers, oblique mouth pliers and self-made special pliers; Phillips screwdriver, flat head screwdriver, good with magnetic; Vacuum cleaner, hair dryer, glue; Clean cotton, alcohol, brush, filling funnel. Next is toner filling: first remove the screw with one end of the screw, use a small screwdriver with a diameter of 1.5mm to knock the pin inward and knock the pin down. Remove the plastic cover and see the purple plastic cover of the compact. Use the same method to remove the other end of the pin, so that the whole toner cartridge, can be easily empty cartridge. Special attention should be paid during the filling process that the toner used in the laser printer must be used according to the model. Different types of printer, toner can not be used with each other, so as not to affect the quality of printing. The toner used in laser printer can be divided into carrier and carrier - free. Generally, toner with carrier is used in powder cartridges with magnetic roller magnetic powder carrier and colloidal scraper structure. Such as HP series, Canon series and other printers. Powder cartridges with cots and steel scraper structure are mostly carrier free toner. | ||||
Welcome to the official website of zhongshan pinyin electronic technology co., LTD,Contact phone number:0760-86380010！
About Us|Products|Contact Us
One-stop supplier of printer consumables！
Professional toner manufacturer, high quality office printing!National advisory service hotline